Masimo Stork Vitals+ - Operation and Advanced Features; Basic Setup and Use of Stork

Stork Vitals+ Basic Setup and Use of Stork
Masimo Corporation 21 www.masimo.com
Alarm Displayed Why is it Alarming? Ways to Check on Your Baby
Low Pulse
Rate
Is your baby sleeping
deeply?
Check on your baby:
• Check baby’s breathing.
• Check for a stuffy nose or blocked throat.
• Check baby’s temperature.
• Check when baby had their last bowel
movement.
• Gently rub the baby’s stomach, back, sides,
arms, or legs with the palm of your hand or
soft towel.
Call 911, if you think your baby needs help.
High Pulse
Rate
Is your ba by crying or
irrita ble?
Check on your baby:
• Attempt to comfort your baby.
• Check baby’s temperature.
• Check your baby is not too hot. Remove
extra blankets and clothing.
Call 911, if you think your baby needs help.
Basic Setup and Use of Stork
Getting Started
You can get the Stork system up and running by following these steps and the in-app
instructions and tutorials:
1. Set up your smart phone with the Stork app.
• Download the app on your smart phone and follow the app instructions to create
an account and a baby profile.
2. Set up the Stork System through the app and complete the following:
• Connect the Stork Camera to the app using local Wi-Fi.
• Install the camera.
• Charge the Stork Sensor.
• Pair the sensor using the app.
• Insert the sensor into the Stork Boot.
• Secure the boot to the foot.
3. Confirm the correct setup
• After the Boot is attached to the foot, open the app.