Stork Vitals+ Basic Setup and Use of Stork
Masimo Corporation 22 www.masimo.com
• Confirm live data on the Live Dashboard.
Step 1: Smart Phone Setup
Prepare the Smart Phone for Use:
A compatible smart phone is required to install and operate the Stork app.
To use your smart phone with the Stork app, check the following:
• Compatibility
Note: For a list of smart phones and operating systems that work with the Stork app,
check www.masimostork.com before upgrading the smart phone or its operating
system.
• Smart phone battery is charged
• Bluetooth is ON
• Wi-Fi is ON and the smart phone in connected to the internet
• Time is set to the current local time
Download and install the Stork app on your smart phone:
Download and install the Stork app. Follow the app instructions to install. For more
on how to install an app, see the smart phone's manual.
Note: If the Stork app requests the smart phone to share its location, select
OK
or
Allow
. The
smart phone location is required for Bluetooth connection on some smart phones.
Create a User Account
After installation, open the app and follow the app instructions to create a new user
account. If you have an existing user account, log in using the account credentials.
Note: If you need to make changes to the account, see
Side Menu
on page 37.
Create a Baby Profile
Follow the app instructions to and set up a
Baby Profile
. Enter the requested information
about the baby when prompted.
Note: If you need to make changes to the baby profile or create a baby profile, see
Side
Menu
on page 37.
To Next Page
Loading...