90
Chapter 7, Monitoring Your Matrox VS4 System
Using X.info to display VS4 information
The Matrox X.info program lets you display information about your Matrox VS4
system and installed VS4 cards, and provides warnings when certain problems
arise, such as when the temperature of your VS4 card exceeds the maximum
operating temperature.
¦NoteReferences to the VS4 card apply to both VS4 and VS4 Pro cards.
Matrox X.info runs continuously to monitor your system, whenever your
computer is turned on and the VS4 card is installed. You can open Matrox X.info
to display system and hardware details by double-clicking the icon on your
Windows taskbar.
¦NoteIf you do not see the icon, check your taskbar properties and make sure
that you’re showing the icon for Matrox X.info.
Displaying system information
To display information about your Matrox VS4 system, select System from the
Display Information About list. On this page, you can see Install
Information
, such as the install path and version of Matrox Mtx.utils.
You can also create an HTML log file of your system information, which can be
useful for troubleshooting. To create this log, use the
Browse button under
System Information Log to select the path and name of the log, then click
Create. If Open file after scan is selected, the HTML system log opens after it
is created.
To Next Page
Loading...
