Matrox VS4 - Files and File Naming

34
Chapter 4, Using the VS4Recorder Pro Application
The folder name is in the following format:
SessionName-YYYY-MM-DD HHMMSS
If the
Use same path option is cleared in the VS4Recorder Pro settings, a
separate session folder is created for each of the source recordings in the
source’s specified record path. The folders are differentiated by the source
input number in the following format:
SessionName-YYYY-MM-DD HHMMSS_input
• Independent mode A separate session folder is created for each of the
source recordings in the source’s specified record path. The folders are
differentiated by the source input number in the following format:
YYYY-MM-DD HHMMSS_input
Files and file naming
Depending on the selected video codec, the recorded video file format will be
either .avi,.mov, or .mp4. If you choose to include audio with your recording, the
first two audio channels from the input source are embedded in the video file, and
separate PCM (.wav) or AAC (.aac) audio files are created based on the specified
audio settings.
¦NoteSeparate .wav and .aac files follow path and naming convention of the
corresponding source video file.
Specifying the save file name
Under
Session and File, in the Filename box for each source, specify the save
file name that you want for the source’s recorded video/audio files. For
information on the file naming convention, see “File naming convention" and
“How files are named".
¦NoteYou can set VS4Recorder Pro to display the source filename in the
corresponding source window (see “Label and filename overlay” on page 57).
¥Tip Even if a source is currently recording, you can set up the next recording
for that source by changing the source
Filename and Label in the Settings
window. The current filename and label settings apply to the source’s next
recording. Once a source recording has started, you can change these settings
without affecting the current recording.