39
Settings
• Multi-Cam mode:
$ One split timer is set for all inputs.
$ When you stop the recording session, the split timer resets.
$ When you connect an input while capturing, that input will split at the
scheduled interval without resetting.
$ When you disconnect and reconnect an input while capturing, that input
will split at the scheduled interval without resetting.
• Independent mode:
$ The split timer operates independently for each of the inputs.
$ When you stop capturing on an input, it resets the split timer of that
particular input.
$ When you connect an input while capturing, that input will split at the
scheduled interval without resetting.
• VS4Control:
$ The split timer operates independently for each machine, so you must set
the interval on each individual machine (in order for all machines to start
when the Master starts the recording session).
$ All split timers start when the Master starts.
$ When you stop recording from the Master, it resets the split timer on all
machines (see “VS4Control” on page 51).
$ When you connect an input while capturing, that input will split at the
scheduled interval without resetting.
$ When you disconnect and reconnect an input while capturing, that input
will split at the scheduled interval without resetting.
Splitting audio and video files
File splitting lets you start editing (with a suitable application) before the
recording session has ended. Before beginning your recording session:
1 Select Split file every in the Session and File section of the VS4Recorder
Pro settings.
2 Enter the time in minutes.
3 Set your other preferences in the Settings window.
4 Start recording.
The (internal) file splitting timer begins, and will save a file at each designated
interval.
To Next Page
Loading...
