Modules & Options
Wireless LAN Switch 7 - 11
7
Wireless LAN Switch
The Wireless LAN switch allows you to quickly and easily toggle power to the
WLAN module when necessary.
You can also use the Fn + F11 key combination (see page 1 - 9) or the Windows
Mobility Center (see page 7 - 28) button to toggle power to the WLAN module,
however these are overridden by the WLAN switch. Check the LED indicator for
the WLAN power status and note the following:
• When the computer boots up, the default WLAN module’s power setting
will be according to the WLAN switch position e.g. if the computer starts up
with the WLAN switch in the “ON” position, then the WLAN module will be
on.
• If the computer enters a power saving state, then default WLAN module’s
power setting upon resuming will be according to the WLAN switch posi-
tion (even if you have used the Fn + F11 key combination or the Windows
Mobility Center button to power off the WLAN module prior to the computer
entering the power saving state) e.g. if the computer resumes from a power sav-
ing state with the WLAN switch in the “ON” position, then the WLAN module
will be on.
To Next Page
Loading...
