Modules & Options
7 - 60 Bluetooth & WLAN Combo Module
7
Bluetooth & WLAN Combo Module
If your purchase option includes the Combination Wireless LAN & V3.0 Blue-
tooth module (either Intel® or 3rd Party) then install the driver as instructed from
the appropriate page (see below).
Use the Fn + F12 key combination to toggle power to the Bluetooth module.
When the Bluetooth module is powered on the indicator will briefly be dis-
played.
•For 3rd party Bluetooth combo modules see the installation procedure see
“3rd Party Bluetooth Combo Driver Installation” on page 7 - 61 and “3rd
Party Bluetooth & WLAN Combo Settings” on page 7 - 62.
•For Intel Bluetooth combo modules see the installation procedure see “Intel
Bluetooth Combo Driver Installation” on page 7 - 69 and “Standard Bluetooth
Configuration in Windows 7” on page 7 - 70.
Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F12 key com-
bination to toggle power to
the Bluetooth module, and
check the LED indicator to
see if the module is pow-
ered on or not (see Table 1
- 2, on page 1 - 9/ Table 1
- 1, on page 1 - 7).
Bluetooth Data Transfer
Note that the transfer of data between the computer and a Bluetooth enabled device is supported in
one direction only (simultaneous data transfer is not supported). Therefore if you are copying a
file from your computer to a Bluetooth enabled device, you will not be able to copy a file from the Blue-
tooth enabled device to your computer until the file transfer process from the computer has been com-
pleted.