MAXDATA M-BOOK 600 - Display Management

Video Driver Controls
B - 4 Intel® Graphics & Media Control Panel
B
Display Devices & Options
Besides the built-in LCD you can also use an external monitor/flat panel display/TV
connected to the external monitor port or to the HDMI-Out port (High-Definition
Multimedia Interface) as your display device. The table below outlines the display
options.
Intel Display Mode Description
Single Display One of the connected displays is used as the display device
Clone Displays
Both connected displays output the same view and may be
configured independently
Extended Desktop
Both connected displays are treated as separate devices, and
act as a virtual desktop

Function Key
Combination
You can use the Fn + F7
key combination to tog-
gle through the display
options:
• Notebook Only
• External Display Only
• Notebook + External
Display
Make sure you give the
displays enough time to
refresh.
Note that HDMI sup-
ports video and audio
signals.
Table B - 1
Display Modes

Attaching Displays
When you first attach an external display you may find that the desktop does not occupy
the full screen area. Use either the display’s auto adjust/configure controls, or the Intel(R)
G&M control panel to configure the full screen display.