Modules & Options
7 - 36 3.75G/HSPA Module
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see “Function/Hot
Key Indicators” on page 1 - 10) to toggle power to the 3.75G/HSPA module.
When the
3.75G/HSPA
module is powered on, the on-screen indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
Table , on page 4
- 3
.
Note that exiting the application does NOT turn off the 3.75G/HSPA mod-
ule.
• Wireless Manager - See “Wireless Manager Installation” on page 7 - 38 for
driver installation information and “Wireless Manager Application” on page 7
- 39 for instructions on using Wireless Manager.
To Next Page
Loading...
