23
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 3 - POSITION LIFTGATE - Continued
70-1/2”
(REF)
3-3/16”
+1/16” / -0”
77-3/8”
+/- 1/16”
2. Position RH mounting plate as shown
in FIGS. 23-1 and 23-1A.
RH MOUNTING PLATE
FIG. 23-1A
RH MOUNTING
PLATE
TOP HANGER
RH MOUNTING
PLATE
INSIDE WALL
VEHICLE FLOOR
INSIDE WALL
EXTENSION PLATE
EXTENSION PLATE
NOTE: Distance between extension plate and RH mounting plate is measured from
the inside edge of mounting plate as shown in illustration.
REAR OF VEHICLE BODY
FIG. 23-1
METHOD 1 - PRE-INSTALL MOUNTING PLATES
AND EXTENSION PLATE ON VEHICLE - Continued
To Next Page
Loading...
