35
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 4 - BOLT LIFTGATE TO VEHICLE - Continued
HANGER
(4 PLACES)
HANGER SLOT
(4 PLACES)
HANGER SLOT
(4 PLACES)
MOUNTING
PLATE
HANGER
(4 PLACES)
HANGING LIFTGATE
FIG. 35-1
REAR VIEW OF LIFTGATE
FIG. 35-2
4. Hang liftgate on the mounting plates
by inserting hangers into hanger slots
(FIGS. 35-1 and 35-2).
Tighten top hanger bolts on the
columns while the Liftgate is sup-
ported by forklift. Loose hanger
bolts could allow the Liftgate to
disengage from the hangers and
fall off the vehicle when platform
is lowered to the ground. Serious
personal injury and equipment
damage could result.
WARNING
!
METHOD 1 - PRE-INSTALL MOUNTING PLATES AND EXTENSION
PLATE ON VEHICLE - Continued
To Next Page
Loading...
