Maxon BMR Series - Page 43

43
11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
STEP 7 - ATTACH PUMP & BATTERY BOX FRAME TO
VEHICLE - Continued
3. Using mounting brackets as a tem-
plate mark and drill holes through
cross members (FIG. 43-1). Bolt
mounting brackets to cross mem-
bers as shown in FIGS. 43-2 and
43-2A. Torque bolts and lock nuts
to 85-128 lb-ft.
NOTE: If welding mounting brackets to cross members,
skip instruction 3.
MARK AND DRILL
FIG. 43-1
CROSS
MEMBER
CROSS
MEMBERS
MOUNTING
BRACKETS
1/2” HOLES
BOLTING PUMP & BATTERY
BOX FRAME
FIG. 43-2
BOLTING BRACKETS
(8 PLACES)
FIG. 43-2A
CROSS
MEMBER
CAP SCREWS
(2 PLACES)
WASHERS
(4 PLACES)
LOCK NUTS
(2 PLACES)
MOUNTING
BRACKETS