27
• Bypas Req Code - If enabled, the user will be required to
enter an access code in order to bypass a zone on this partition
(default=Yes).
• AutoArm Req Cd - If enabled, the user must enter an access
code during the auto-arm pre-alert period in order to cancel
automatic arming. If disabled, pressing any key will cancel
auto-arming (see
8.2 ”Automatic Arming’ (default=No).
NOTE: The Auto Arm Cancellation reporting code, if programmed,
will be sent in either case.
• Cmd. Out Req Cd - If enabled, the user will be required to
enter an access code to be able to activate any output pro
-
grammed for [*][7][X] Command Output. If disabled, no
code will be required. There are eight toggle options, one for
each of the Command Outputs 1-8. (Default for all = No.)
• [*][6] Any Code - If enabled, any access code can be used to
access [*] [6] user functions. If disabled, only a master code
will be able to access these functions (default=No).
Duplicate Code Toggle
When this toggle option is enabled the system will not allow the
programming of duplicate user codes. If a user code is entered
that matches any of the other 1500 users, Installer, Second Master,
Walk Test or Guard code, an error tone will be generated and the
data will not be saved. When this toggle option is enabled the
panel will not perform any check for duplicates when codes are
programmed.
7.10 Access Levels
Ref #: [0100XX05] where XX = Partition 01-08
Access levels allow access codes to be active according to a
schedule. Only one access level can be assigned each user. See the
Instruction Manual ‘Access Codes’ for details on access code
programming.
Up to 61 access levels can be programmed per partition. To pro-
gram an access level, select the access level number 02-63. Enter
the number of the date schedule programmed for the times and
days you wish the access level to follow (see
14.1 ”Date Sched-
ules’).
Access level 00 means that the user will never have access.
Access level 01 means that the user will always have access to a
given area.
NOTE: Always program System Master codes as access level 01.
To Next Page
Loading...
