EasyManua.ls Logo

Maxsys PC4020 - Section 1: Introduction; Out of the Box; Specifications and Features

Maxsys PC4020
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Section 1: Introduction
1.1 Out Of The Box
Please verify that the following components are included in the
PC4020 package.
• 1 PC4050C or PC4001C cabinet
• 1 Main control module
• 1 Hardware package which includes:
• 32 EOL resistors (5600)
• 1 Black cabinet plug
• 1 Green ground strap
•5 PCB mounting standoffs
• 1 set of documents which includes:
• 1 Installation Manual
• 1 Programming Worksheets
• 1 Instruction Manual
1.2 Specifications and Features
Main Control Panel
• AC Input – 16 VAC, 40VA minimum
• Battery Charger – 350 mA to charge 12VDC lead-acid batter-
ies
• Bell Circuit – 12 VDC, 700 mA continuous maximum
• Auxiliary Power Output: 12 VDC, 500 mA maximum
• Switched Auxiliary Power Output 12 VDC, 300 mA maxi-
mum
• PGM 1 & 2 – two options:
•12 VDC, 50 mA maximum each as standard outputs
•12 VDC, 170 mA maximum each when used for address-
able loop
• 4-wire Combus power – 500 mA maximum
• 16 Zone inputs
• Supervised dialer output
• Earth ground connection
• All outputs rated to operate over the range of 11.6 to 12.6V
for UL Listed systems.
Expansion Capabilities
• Up to 128 zones total using
• PC4108A 8-zone input modules
• PC4116 16-zone input modules
• PC4164 v2.x wireless receivers and wireless devices
• PGM outputs for addressable devices
• Up to 16 keypads total using
• LCD4501 keypad (with function keys) - v2.0 or later
• LCD4500 keypad - v2.02 for function key support (number
keys 1-5)
• Up to 144 low power outputs total using
• PC4216 low power output modules (v2.1 required for Tem-
poral Fire option)
• Up to 64 relay outputs total using
• PC4204 quad relay and power supply module; also for
Combus repower (v2.1 required for Temporal Fire option)
• PC4204CX Combus repeater
• Up to 8 supervised bell outputs total using
• PC4702BP (up to 4)
• Up to 32 card access-controlled doors
• PC4820 dual card reader modules (up to 16)
• System Printer/DVACS* output using
• DataLink**
• PC440X module
• Dual phone line and Class ‘B’ fire zones using
• PC4701 fire module
• Backup communication using
• LINKS1000 cellular communicator
• LINKS2150 long-range transmitter
• LINKS2450 long-range transmitter**
• Any compatible alternate communication module**
• T-Link TCP/IP Ethernet Communicator (see the T-Link
Installation Manual part no. 29001007)
• Skyroute Max
• Telephone access & automation items using
• ESCORT4580 Audio Assistant (v1.3 or greater)
• Remote annunciation using
• PC4612 – 12-zone point annunciator
• PC4632 – 32-zone point/graphic annunciator
• PC4664 – 64-zone point/graphic annunciator
• Central station talk/listen** and intercom capabilities using:
• PC4936 audio interface module
• PC4937 8-port expansion module
• LCD4501/4500 keypad and audio station
• PC5921 audio stations
• Up to 32 telephone entry doors
• PC4850 module (up to 16)**
Downloading Capabilities
• Downloading Software: DLS2002**
• PC-Link connector – for local upload/download
• End user PC-Link using PC4401 as isolator**
• DataLink access using PC4401
• T-Link TCP/IP module
UL 294 Access Control Performance Levels
• Endurance = II
• Standby Power = IV
• Line Security = I
• Destructive Attack = I
* DVACS is a registered trademark of Electro Arts Limited
** Not UL Listed. Do not use in conjunction with UL Listed systems.

Table of Contents

Other manuals for Maxsys PC4020