Mazda 6 - Vehicle Roll Prevention Function (Automatic Transaxle)

4 – 19
When Driving
Start/Stop Engine
Vehicle Roll Prevention Function (Automatic transaxle)
Vehicles with the i-stop function are equipped with a vehicle roll prevention function. This
function prevents the vehicle from rolling, such as when releasing the brake pedal while on
a slope under the following conditions:
 
While engine idling is stopped (prevents the vehicle from rolling back)
 
When the engine restarts after releasing the brake pedal (prevents the vehicle's sudden
movement due to vehicle creep), sudden movement of the vehicle is prevented by
controlling the brakes.
Release foot from brake pedal Vehicle brake force maintained
Engine restarted Acceleration
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 