Mazda 6 - How to Use the Bluetooth Audio System

5 – 134
Interior Features
Bluetooth
®
How to Use the Bluetooth
®
Audio System
Switching to Bluetooth
®
audio mode
To listen to music or voice audio recorded to a Bluetooth
®
audio device, switch to the
Bluetooth
®
audio mode to operate the audio device using the audio system control panel.
Any Bluetooth
®
audio device must be paired to the vehicle's Bluetooth
®
unit before it can be
used.
Refer to Bluetooth
®
Preparation (Type C/Type D) on page 5-106 .
1. Turn on the Bluetooth
®
audio device's power.
2. Switch the ignition to ACC or ON.
3. Select the
icon on the home screen to display the Entertainment screen.
4. When
is selected, switches to the Bluetooth
®
audio mode to begin playback.
NOTE
 
If Bluetooth
®
audio is used after using Aha
™
or Stitcher
™
radio, the application on the
mobile device has to be closed ¿ rst.
 
If the Bluetooth
®
audio device does not begin playback, select the icon.
 
If the mode is switched from Bluetooth
®
audio mode to another mode (radio mode),
audio playback from the Bluetooth
®
audio device stops.
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 