Mazda 6 - Clock

5 – 28
Interior Features
Audio System
Clock
Audio displayAudio control dial
Hour/Minute set switch
:00 button
Menu buttonClock button
The figure is an example showing the type A unit.
Setting the time
The clock can be set at any time when the
ignition is switched to ACC or ON.
1. To adjust the time, press the clock
button (
) for about 2 seconds until
a beep is heard.
2. The clock's current time will À ash.
Time adjustment
 
To adjust the time, press the hour/
minute set button (
, ) while the
clock's current time is À ashing.
 
The hours advance while the hour set
button (
) is pressed. The minutes
advance while the minute set button
(
) is pressed.
3. Press the clock button ( ) again to
start the clock.
Time resetting
1. Press the clock button (
) for about
2 seconds until a beep is heard.
2. Press the :00 button ( 1 ).
3. When the button is pressed, the time
will be reset as follows:
(Example)
12:01—12:29ĺ12:00
12:30—12:59ĺ1:00
NOTE
 
When the :00 button ( 1 ) is pressed,
the seconds will start at “ 00 ”.
 
Switching between 12 and 24-hour
clock time:

Press the menu button ( )
several times until 12 and 24-hour
clock time are displayed. Turn the
audio control dial in either direction,
select the desired clock setting while
the preferred clock time is À ashing.
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 