Mazda 6 - To Return the Seatback to Its Upright Position; Armrest

2 – 14
Essential Safety Equipment
Seats
To return the seatback to its upright
position:
WARNING
When returning a seatback to its
upright position, make sure the 3-point
seat belt is not caught in the seatback
and the 3-point seat belt is not twisted.
If the seat belt is used while it is twisted
and caught in the seatback, the seat
belt cannot function at its full capacity,
which could cause serious injury or
death.
When returning a seatback to its
upright position, make sure that it is
¿ rmly locked and the red indication is
not visible (Wagon).
If the red indication is visible behind
the push knob, it means the seatback
is not locked. If the vehicle is driven
without the seatback locked, it could
fold down suddenly and cause an
accident.
Locked position
Unlocked position
Red indicator
1. Insert the 3-point seat belt into the belt
clip.
2. Press the seatback rearward and lock it
in place. After returning the seatback
to its upright position, make sure it is
securely locked.
Armrest
The rear armrest in the centre of the rear
seatback can be used (no occupant in the
centre seat) or placed upright.
WARNING
Never put your hands and ¿ ngers
around the moving parts of the seat
and armrest:
Putting your hands and ¿ ngers around
the moving parts of the seat and
armrest is dangerous as they could get
injured.
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 