Mazda 6 - Tyre and Inflation Pressure

To Next Page

To Previous Page

–

Speci¿ cations

Tyre and inÀ ation pressure

NOTE

The tyres have been optimally matched with the chassis of your vehicle.

When replacing tyres, Mazda recommends that you replace tyres of the same type

originally ¿ tted to your vehicle. For details, contact an expert repairer, we recommend an

Authorised Mazda Repairer .

Check the tyre pressure label for tyre size and inÀ ation pressure (page 6-42 ).

After adjusting the tyre pressure, initialization of the tyre pressure monitoring system is

necessary to make the system operates normally.

Refer to Tyre Pressure Monitoring System Initialization on page 4-230 .

Standard tyre

Tyre size

InÀ ation pressure

Up to 3 persons —Full load

225/55R17 97V

Front 230 kPa (2.3 bar, 33 psi) 250 kPa (2.5 bar, 36 psi)

Rear 230 kPa (2.3 bar, 33 psi) 320 kPa (3.2 bar, 46 psi)

225/45R19 92W

Front 230 kPa (2.3 bar, 33 psi)

250 kPa (2.5 bar, 36 psi)

Rear 230 kPa (2.3 bar, 33 psi) 320 kPa (3.2 bar, 46 psi)

1 person's weight: About 75 kg

*1 European models

SKYACTIV-G 2.5 (Saloon)

Before driving at high speeds, increase the pressure of the front tyres. For speeds above 210 km/h (131 mph),

increase the pressure of the front tyres by 20 kPa (0.2 bar, 2.9 psi).

SKYACTIV-D 2.2 STANDARD POWER (Saloon)