Mazda 6 - I-ELOOP Control Status Display; I-ELOOP Charging Display

4 – 102
When Driving
i-ELOOP
i-ELOOP Control Status Display
T h e d r i v e r i s n o t i ¿ ed of the i-ELOOP
power generating status and the vehicle
conditions by the control status display.
The i-ELOOP power generating status is
displayed in the centre display.
Refer to Control Status Display on page
4-104 .
i-ELOOP Charging Display
If the engine is started after the vehicle has
not been driven for a long period of time,
an “i-ELOOP charging” message may be
indicated in the display.
Leave the engine idling and wait until the
message disappears.
NOTE
If the vehicle is driven while the
message is displayed, a beep sound is
heard.
If you turn the steering wheel while the
message is displayed, it will feel heavier
than normal, but this does not indicate
an abnormality. Stop the vehicle in a
safe location with the engine running
and do not attempt to turn the steering
wheel. The steering operation will return
to normal after the message is no longer
displayed.
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 