Mazda 6 - Seat Recline (Manual Seat); Lumbar Support Adjustment (Drivers Seat)

2 – 6
Essential Safety Equipment
Seats
Seat Recline
(Manual Seat)
To change the seatback angle, lean forward slightly while raising the lever. Then lean back
to the desired position and release the lever.
Make sure the lever returns to its original position and the seatback is locked in place by
attempting to push it forward and backward.
(Power Seat)
To change the seatback angle, press the front or rear side of the reclining switch. Release the
switch at the desired position.
Lumbar Support Adjustment (Driver's Seat)
(Manual Operation)
To increase the seat ¿ rmness, move the lever forward. Move the lever backward to decrease
¿ rmness.
(Power Operation)
To increase the seat ¿ rmness, press and hold the front part of the switch to the desired
position, then release it.
Press the rear part of the switch to decrease ¿ rmness.
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 