Mazda 6 - Playback (Bluetooth); Selecting a File (Track); Fast-Forward;Reverse (AVRCP Ver. 1.3); Switching the Display (Only AVRCP Ver. 1.3)

5 – 131
Interior Features
Bluetooth
®
NOTE
Some Bluetooth
®
audio devices need a
certain amount of time before the “
”
symbol is displayed.
3. Press the media button (
) to
switch to the Bluetooth
®
audio mode
and start playback.
If the current device version is lower
than AVRCP Ver. 1.3: “ BT Audio ” is
displayed.
If the current device is AVRCP Ver. 1.3:
The playback time is displayed.
NOTE
 
If the Bluetooth
®
audio device does
not begin playback, press the Play/
Pause button (4).
 
If a call is received on a hands-free
mobile phone during playback from
the Bluetooth
®
audio device, the
playback is stopped. Playback from
the Bluetooth
®
audio device resumes
after the call ends.
Playback
1. To listen to a Bluetooth
®
audio device
over the vehicle's speaker system,
switch the mode to Bluetooth
®
audio mode. (Refer to “Switching to
Bluetooth
®
audio mode”)
2. To stop playback, press the Play/Pause
button (4).
3. Press the button again to resume
playback.
Selecting a ¿ le (track)
Selects the next ¿ le (track)
Short-press the track up button (
).
Selects the beginning of the current ¿ le
(track)
Short-press the track down button (
).
Fast-forward/Reverse (AVRCP Ver. 1.3)
Fast-forward
Press and hold the fast-forward
button (
).
Reverse
Press and hold the reverse down button
(
).
Switching the display (only AVRCP Ver.
1.3)
The information displayed on the audio
display changes as follows each time the
text button ( 3 ) is pressed during playback.
Button
Information displayed
on audio display
Elapsed time
Album name
Song name
Artist name
NOTE
 
If title information is not available,
“ NO TITLE ” is displayed.
 
This unit cannot display some
characters. Characters which cannot
be displayed are indicated by an
asterisk (
).
/C\FCA(-''(A'FKVKQPKPFD/C\FCA(-''(A'FKVKQPKPFD 