MCCORMICK X60.40 - Float Position Operation

133
Operation
5
Float Position
(if available)
Tooperatetheremotehydraulicsinafloatcondition,
turnthelockcontrol(2)fullycounterclockwise.
Thiswillallowthecontrollevertogocompletelyfor-
wardintothefloatposition.
Theremotehydrauliccontrolleverscanbelockedout
ofthefloatposition.Whenusingequipmentforwork
wherethefloatpositionisnotwanted,turnthelock
controlonepositionclockwisesothatthecontrollever
cannotbemovedintothefloatposition.
NOTE: Single action cylinders can be operated in a float or
no float position at the same time that the hitch is operated.