Technical specifications
244
Rear axle
Rearaxle withbevelgearpair and epicyclicalrearfinal
drives.
Interflange:.........................................................1640mm
Bevelgearpair:........................................ 11/51=4,6364
Rearfinaldrives:......................................................... 6,6
Totalreductionratio:......................................... 30,60024
Front and Rear Axle ratio
Withoutcreeper................................................... 1,3762
Withcreeper..........................................................1,3806
Differential lock
Reardifferential lock with electro-hydrauliccontroland
hydraulicengagement.
Inallmodels,thedifflockisdisengagedbymeansofthe
brakepedals.
Frontandreardifferentiallockingtakesplaceatthesame
time by means of the Twin-Lock system in four-wheel
drivetractors.
CAUTION: The technical specifications given here are
only of a general kind. For technical specifications of
each market, please refer to the information material
supplied by your Dealer.
Transmission
Xtrashift
4-speedgearboxfor3ranges(Low-Normal-Fast)with
electro-hydraulic gearbox with three Powershift ranges
under load (available only forward) and with electro-
hydraulicreverseshuttle.
Itgivesatotalof36FWD+12REVspeeds.
Park-Lock(onrequest)
4-speedgearboxfor4ranges(Low-Normal-Fastand
Creeperonrequest)withelectro-hydraulicgearboxwith
threePowershift rangesunderload (availableonlyfor-
ward)andwithelectro-hydraulicreverseshuttle.
Itgivesatotalof48FWD+16REVspeeds.
Park-Lock(onrequest)
X60.20-X60.30-X60.40 Xtrashift Gearbox
Ontractorswithmechanicallyregulatedengine,theOver-
driveisautomaticallyselectedonreachinga40kphspeed.
X60.50 - Xtrashift Gearbox 40 kph ECO
Thetransmissioncontrollerlimitsmax.speedto40kphat
1900engineRPM,thusobtainingasignificantreductionin
fuelconsumptionwhentransportinganddrivingonroad.
All models - Potentiometer to regulate the engage-
ment speed of electro-hydraulic clutches.
For speed charts, see the Operation section, Gear-
box.