MCCORMICK X60.40 - Seat Belt; Mechanical Suspension Seat

46
Controls - Cab
Seat Belt
WARNING: Always securely fasten your safety
belt. Your tractor is equipped with a ROPS
cab for your protection. The seat belt can
help insure your safety if it is properly used
and maintained. Never wear the belt in a
twisted condition or pinched between the seat
structural members.
Adjusttheseattoyourrequirements.
Leanwithyourbackstraightagainstthebackrest.Pullthe
seatbeltcompletelyacrossyourbodyandpushthemetal
eye(1)intothelatchassembly(2)untilitlocks.
Adjustthepositionoftheseatbeltaslowonyourbody
aspossible.
Toreleasetheseatbelt,pushtheredbutton(3)onthe
latchassembly.
IMPORTANT: From time to time, carefully inspect the 
seat belt and replace it if worn or damaged.
1
2
3
Mechanical suspension seat
(if equipped)
1. FORE/AFT ADJUSTMENT CONTROL - Lift lever and
adjustseatasrequired,releaselevertolockinposition.
2.HEIGHTADJUSTMENTCONTROL-Grasptheseatand
liftittotherequiredheight.Tolowerit,raisetheseatand
moveitbeyondtheupperend stop, then lower to the
requiredheight.
3. WEIGHT ADJUSTMENT CONTROL - Without the
operatorintheseat,turntheknobasrequired,untilthe
operator'sweightisdisplayedintheindicator.
WARNING: To avoid injuries, the operator's
weight setting should be checked and ad-
justed to the operator before starting the
tractor.