56
Controls - Cab
Main components of the cab
1-Frontfieldlights;2-Rotarybeacon,3-Rearfieldlights;
4-Rearwindow;5-Fullopeningdoors,withsafetylock;
6-Rearviewmirros;7-Sunroof(Topversion).
Cab
The cab is made of steel sections and is fastened to
the tractor by means of a double system of rubber
dampers(silentblock)protectingthedriver'sseatboth
fromvibrationsandfromenginenoise.Thenoisepeak
isthereforelimitedtolowvalues,formorecomfortfor
theoperator.
Doors (5)
Bothdoorscanbeopenedbothfromtheinnerandouter
side,andkeptopenbydampeningcylinders.Bothdoors
areprovidedwithalockwithkey.
Rear window (4)
Releasetherearwindowlockandturnthehandlecoun-
terclockwise to open it. The window is kept open by
dampeners.
Field lights
Thecabcanbeprovidedwithfront(1)andrear(3)field
lightstoimprovevisibilitywhenworkingatnight.Theon/
offswitchesareonthecabroof.
Rotary beacon
The rotary beacon is installed on the rear side of the
cab.
CAB
Allnon-metalliccomponentswithinthecabcomplywiththeISO3795standard.
The cab is approved according to OECD codes concerning ROPS test (protection against overturning) and safety
belts.
NOTE: See the cab maintenance section for filter use
and maintenance.