McHale Fusion 3 Baler & Wrapper
29
Ensure area around brakes is clear of dry material
(CST00163)
Float decal. Indicating that during operation of the
baler, the control lever of the spool operating the pick-
up reel should be in the float position.
(CST00609)
The PTO wide angle joint must never exceed 80
degrees, both when stationary or during operation.
Permanent damage may result otherwise.
(CST00658)
Wheel direction
(CST00711)
Keep hands out of crush area
(CST00753)
Keep hands out of crush area
(CST00754)
Lock the chamber door before working on the open
bale-forming chamber
(CST00756)
To Next Page
Loading...
