EasyManua.ls Logo

mectron Piezosurgery - INSTALLATION PROCEDURE; Installation Safety Precautions

mectron Piezosurgery
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
CLEAN/FLUSH FUNCTION
Immerse the end part of the peristaltic
pump tube or the tube of the bone
grafting kit, if used, in a container
containing the enzymatic detergent
solution prepared;
3
Position the handpiece, with or without
insert, above a container to contain
the liquid that will outow during the
cleaning cycle;
4
2.2 PIEZOSURGERY
®
touch
To enter the cleaning mode, select
PUMP/CLEAN on the keyboard: all the
other selection options present on the
display are disabled, and the PUMP/
CLEAN writing ashes;
NOTE: You can exit the cleaning mode
by pressing on PUMP/CLEAN again or,
alternatively, by waiting for at least 15
seconds. The Clean function is disabled
and the keyboard is enabled again, and
displays the last setting used;
1

Table of Contents

Other manuals for mectron Piezosurgery

Related product manuals