8
If the bone grafting kit has been used,
disconnect the tube-to-tube connector
from the peristaltic pump tube and from
the tube of the bone grafting kit;
7
If present, unscrew the insert from the
handpiece by using the torque wrench;
WARNING: During the tightening
and removing operations, the user must
pay particular attention to avoiding
injury from inserts with sharp points and
cutting edges.
8
Unscrew the front cone of the handpiece;
NOTE: USE OF THE HANDPIECE WITH
LIGHT: on the cone with LED light the
metal ring cannot be separated from the
cone in plastic;
9
Remove the protective foil from the
keyboard, if present.
10
To Next Page
Loading...
