Service Manual 800 series Rev. 1/01.07.2019
31
Medisoft RAM Italia S.r.l. - All rights reserved
6 - Diagnosis of the gliding subsystem
This procedure, whose flow chart is described in the next paragraph, takes into consideration the
possible causes of malfunction in the sliding subsystem starting from the most probable and listing
in descending order those with least probability.
Possible malfunction factors:
1. Drive belt
2. Running belt
3. Insufficient cleaning and lubrication of the running belt
4. Insufficient cleaning and lubrication of the deck
5. Rollers and bearings
To Next Page
