Medisoft 870 S - 6.9 - Running Belt Replacement

Service Manual 800 series Rev. 1/01.07.2019
41
Medisoft RAM Italia S.r.l. - All rights reserved
We can now remove the running belt for a waxing treatment or replacement (Fig.38).
6.9 - Replacing running belt
The tape should be replaced if:
• Have 5 or more years of use
• Damaged or in poor condition
• Particularly damaged interior surface (Fig.48)
Fig.48
6.10 - Disposal of running belt
Essential tools:
• Scissors
This is the procedure to make unusable the running belt.
Cutting by scissors.
6.11 - Deck Cleaning
Essential tools:
• Brush
• Sandpaper
• Vacuum cleaner or compressor
Through the use of sandpaper, the surface of the base will be folded away, eliminating as much as
possible the residue of the old wax and any other impurities.
With the use of the brush you will remove from the surface of the deck all the accumulation of dust
and dirt that will be created. This operation will be repeated until all the old waxy material is
removed. For a better cleaning result, it is advisable to use a vacuum cleaner or compressor to
effectively remove dust from the machine that you have created with this process.