Service Manual 800 series Rev. 1/01.07.2019
51
Medisoft RAM Italia S.r.l. - All rights reserved
Status responses
Belt status followed by 1 byte of data:
31 (hex.) - Belt stopped
32 (hex.) - Belt started, CDS enabled
33 (hex.) - Belt started, CDS disabled
Current belt speed followed by four bytes of ASCII data
Current elevation followed by four bytes of ASCII data
Current set or stage speed (independent of belt status) followed by
four bytes of ASCII data
Current set or stage elevation followed by four bytes of ASCII data
Current total time followed by four bytes of ASCII data
Current distance followed by four bytes of ASCII data
Current weight followed by four bytes of ASCII data
Current total VO2 followed by four bytes of ASCII data
Current Mets followed by four bytes of ASCII data
Status Request not recognized
To Next Page
