Meggitt vibro-meter VM600 - Page 48

QUICK START MANUAL Document reference MAVM600MK2MPS-QS/E
VM600
Mk2
machinery protection system (MPS) Edition 2 - February 2021
2-8
MPC4
Mk2
machinery protection and condition monitoring module
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) HARDWARE
(c)
Configuration as per (b).
Trip multiply (TM) active.
System locked.
Figure 2-2: MPC4
Mk2
LED activity for typical VM600
Mk2
MPS situations
(a)
Module/system booting (start up).
(b)
System operating normally:
CH1, CH2, CH3 and AX1
configured and operating normally
(CH1 and CH2 configured for
dual-channel processing);
CH4 and AX2 not configured;
System locked.
Note:
LED
blinking
slowly.