Meggitt vibro-meter VM600 - Page 68

QUICK START MANUAL Document reference MAVM600MK2MPS-QS/E
VM600
Mk2
machinery protection system (MPS) Edition 2 - February 2021
2-28
RLC16
Mk2
relay module
OVERVIEW OF VM600
Mk2
MACHINERY PROTECTION SYSTEM (MPS) HARDWARE
2.4.2 RLC16
Mk2
module factory assigned defaults
2.4.2.1 RLC16
Mk2
module as part of a VM600
Mk2
solution
For a RLC16
Mk2
module delivered as part of a VM600
Mk2
solution, the RLC16
Mk2
module’s
hardware jumpers are normally pre-configured in the factory for the application before
delivery of the system.
2.4.2.2 RLC16
Mk2
module as a spare part
For a RLC16
Mk2
module delivered as a spare part, the RLC16
Mk2
module is not
pre-configured for the application before delivery.
Accordingly, for a RLC16
Mk2
module delivered as a spare part, the end-user/operator must
configure the RLC16
Mk2
module’s hardware jumpers as required for the application
(see 1.9 Hardware configuration).