GASOLINE ENGINES BRAVO MODELS
Page 40 of 116
Installing Power Trim Pump
NOTE: See 90-863152 for mounting hole template.
1. Mount pump in desired location.
IMPORTANT: Make hydraulic connections as quickly as possible to prevent oil from
leaking out of system. Be careful not to cross-thread or overtighten hose fittings.
2. Connect hydraulic hoses to trim pump. Torque fittings to 125 lb-in. (14 Nm).
3. Connect power trim pump control harness to trim pump.
4. Connect trim limit switch wires and secure with wire retainer and sta-strap.
75126
50630
75127
50632
a
c
e
f
g
b
d
a-Black Hose Fitting (UP Circuit)
b-Gray Hose Fitting (DOWN Circuit)
c-Control Harness
d-Sta-Strap
e-Trim Limit Switch Wire (with Blue Sleeve) To BLUE/WHITE Harness Wire
f-Trim Limit Switch Wire (with Purple Sleeve) To PURPLE/WHITE Harness Wire
g-Wire Retainer And Sta-Strap
To Next Page
Loading...
Need help?
General