GASOLINE ENGINES BRAVO MODELS
Page 7 of 116
Installation Products
Description Part Number
Quicksilver Engine Coupler Spline Grease 92-816391A4
Quicksilver 2-4-C Marine Lubricant With Teflon 92-825407A3
Quicksilver U-Joint and Gimbal Bearing Grease 92-828052A2
Quicksilver Special Lubricant 101 92-13872A1
Quicksilver Liquid Neoprene 92-25711-2
Quicksilver Power Trim and Steering Fluid 92-90100A12
Dexron III - Automatic Transmission Fluid Obtain Locally
Quicksilver Perfect Seal 92-34227-1
Transom Drilling Fixture 91-43693A2
Engine Alignment Tool 91-805475A1
Shift Cable Adjustment Tool 91-12427
Engine Mount Drilling Fixture 91-806794A1
Torque Specifications
Torque
Description
lb-in. lb-ft Nm
sterndrive Unit Gear Lube Monitor - 90°
Hose Barb Fitting
80 9
Speedometer Pickup Barb Fitting 13 1.5
Exhaust Pipe or Block-off Plate 23 31
Power Steering Hydraulic Hose Fittings 23 31
Power Trim Pump Hose Fittings 125 14
Propeller Nut (Bravo One and Two)
1
55 75
Front 100 136
Propeller Nuts (Bravo Three)
1
Rear 60 81
Rear Engine Mounts 38 51
Steering Cable Coupler Nut 35 47
Steering System (Pivot Bolts) 25 34
Sterndrive Unit Fasteners 50 68
Transom Assembly Fasteners 23 31
Seawater Pickup Fitting 45 5
Power Trim Cylinder Fasteners Tighten until they contact.
Fuel Line Inlet Fitting See Note.
1
: Amount specified is MINIMUM.
NOTE: Refer to Fuel Delivery System - “Special Information For All Gasoline Engines.”
To Next Page
Loading...
Need help?
General