GASOLINE ENGINES BRAVO MODELS
Page 76 of 116
7. Return remote control throttle lever to idle position and ensure that throttle plate is com-
pletely closed.
75452
a
a-Throttle Plates
8. Reinstall flame arrestor and tighten clamp securely.
Sterndrive Unit Installation
1. Remove trim cylinder support and dust cover from bell housing studs. Retain elastic stop
nuts and flat washers.
2. Remove monitor cap and fill gear lube monitor.
75404
a
a-Gear Lube Monitor
To Next Page
Loading...
Need help?
General