GASOLINE ENGINES BRAVO MODELS
Page 85 of 116
2. Raise and lower sterndrive unit (to the full up position) 6 to 10 times to purge air from
system. Check oil level visually, (with sterndrive unit in the full down position). Oil level
should be maintained at bottom lip of fill neck.
22031
a
a-Fill Neck
3. Check all trim line connection points for leaks. If fluid is visible at fittings, tighten fitting(s).
Torque fitting(s) to 125 lb-in. (14 Nm).
Trim Position Sender Adjustment
1. Loosen both trim position sender attaching screws.
71220
a
b
a-Attaching Screws
b-Trim Position Sender
To Next Page
Loading...
