Mercury BRAVO

GASOLINE ENGINES BRAVO MODELS
Page 66 of 116
8. Remove adjustment tool.
9. Shift remote control lever into full forward position. Place end of adjustment tool in barrel
retainer.
RH rotation Bravo One, Two and Three Models: Rear slot in tool should fit over shift
lever stud.
LH rotation Bravo One And Two: Forward slot in tool should fit over shift lever stud.
If slot does not fit over stud, loosen shift lever stud and slide stud up or down until slot in tool
fits over stud. When adjustment is correct, retighten stud.
71662
a
b
c
RH Rotation Bravo One, Two, Three
71663
a
b
c
d
LH Rotation Bravo One And Two
a-Adjustment Tool
b-Barrel Retainer
c-Shift Lever Stud
d-Shift Lever Adjustment Slot
10. Remove adjustment tool.
11. Lubricate shift cable pivot points with 30W oil.