GASOLINE ENGINES BRAVO MODELS
Page 74 of 116
7. Reinstall flame arrestor and tighten screws securely. Connect crankcase vent hose to
flame arrestor as shown.
75115
a
a-Crankcase Vent Hose
7.4L MPI MODELS
1. Place remote control handle(s) in neutral idle position.
2. Remove starboard side engine cover.
IMPORTANT: Be sure that cable is routed to avoid sharp bends and/or contact with
moving parts. DO NOT fasten any items to throttle cable. Outer cable must be free to
move when cable is actuated.
3. Remove flame arrestor.
75447
a
b
a-Flame Arrestor
b-Screws
To Next Page
Loading...
