Connect on Demand - In this mode, the internet connection can be terminated automatically
after a specified inactivity period (Max Idle Time) and be re-established when you attempt to
access the Internet again. If you want your Internet connection keeps active all the time,
please enter 0 in the Max Idle Time field.
Otherwise, enter the number of minutes you want to
have elapsed before your Internet access disconnects.
Connect Automatically - The connection can be re-established automatically when it is
down.
Connect Manually - This mode also supports the Max Idle Time function as Connect on
Demand mode. The Internet connection can be disconnected automatically after a specified
inactivity period.
PPTP Advanced settings
MTU Size (in bytes) - The default MTU size is 1480 bytes. It is NOT recommended that you
change the default MTU size unless required by your ISP.
WAN Rate Settings - Select the rate and duplex mode for the WAN port. It is recommended
to keep the default auto mode.
Click Save to make the settings effective.
- 21 -