Mercusys MW305R User Manual

MW305R
300Mbps Wireless N Router User Guide
1. Download the latest firmware upgrade file from our website (www.mercusys.com).
2. Click Browse to locate and select the downloaded firmware file.
3. Click Upgrade.
4. The router will reboot automatically after the upgrade.
5.5.4 Factory Default Restore
Go to System Tools
→
Factory Default Restore, and then and you can restore the configurations
of the router to factory defaults.
Click Restore to reset all configuration settings to their default values.
• The default IP address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
5.5.5 Backup & Restore
Go to System Tools
→
Backup & Restore, and then you can save the current configuration of the
router as a backup file and restore the configuration via a backup.
NOTE:
All your custom settings will be lost when defaults are restored.
NOTE:
To avoid any damage, it is important to keep router powered on during the entire process.
- 44 -

Mercusys MW305R Specifications

General

DSL WAN	-
Ethernet WAN	Yes
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	300 Mbit/s
Product type	Tabletop router
Product color	White
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
USB port	No
Ethernet LAN (RJ-45) ports	3
Output current	0.6 A
Output voltage	5 V
Power source type	AC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Transmit power	0 dBmW
Antenna gain level (max)	5 dBi
Certification	CE RoHS
Cables included	LAN (RJ-45)
Supported network protocols	IPv4
Security algorithms	WPA-PSK, WPA2-PSK
Package type	Box
Package depth	198 mm
Package width	267 mm
Package height	68 mm
Package weight	450 g
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	115.44 mm
Width	168.94 mm
Height	34.66 mm