￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Installation
899 Coulometer
￭￭￭￭￭￭￭￭
17
Figure 8 Connecting the Power Box
Proceed as follows:
1
Connect the plug of the Power Box with the power socket (2-7) of
the coulometer.
NOTE
The Power Box plug is protected against accidental disconnection
of the cable by means of a pull-out protection feature. If you wish
to pull out the plug, you first need to pull back the outer plug
sleeve.
CAUTION
Switch off the 899 Coulometer correctly by pressing the red [STOP]
key before you interrupt the connection with the Power Box. If this is
not done, then there is a danger of data loss.
To Next Page
Loading...
Need help?
General
