5.4 Methods
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36
￭￭￭￭￭￭￭￭
899 Coulometer
￭ Press [BACK].
The method will be saved and the method table is displayed.
Entering a new name:
￭ Press [OK].
The text editor opens.
￭ Enter a method name (max. 12 characters) and apply with
Accept or [BACK].
￭ Press [BACK].
The method will be saved and the method table is displayed.
5.4.4 Exporting a method
The methods can be exported to a connected USB flash drive.
NOTE
This function is possible only if a USB flash drive is connected as an
external storage medium.
To export a method, proceed as follows:
1
Opening the method table
￭ In the main dialog, select Method and press [OK].
The method table with the stored methods opens:
2
Selecting the method
￭ Select the desired method.
3
Exporting the method
￭ In the function bar, select Export and press [OK].
The method is being exported. The directory structure on the USB
flash drive is described in the more detailed manual.
To Next Page
Loading...
