￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Carrying out the water content determination of a sample
￭￭￭￭￭￭￭￭
41
The water seeping in is titrated off continuously (basic drift).
Entering sample data in the main dialog
1
Entering sample identification and sample size
￭ Tap on the input field Identification 1.
￭ Enter a designation for the sample (e.g., type of sample or an
analysis number).
￭ Tap on the input field Identification 2.
￭ Enter a further designation for the sample (e.g., batch number or
sampling date).
Adding sample
1
Prepare the sample for adding into the titration cell.
To Next Page
Loading...
Need help?
General
