6.2 Carrying out the water content determination
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
44
￭￭￭￭￭￭￭￭
If you would like to exclude a titration from the statistical calculation, you
can select it and then tap on [Result on/off] or [Determ. on/off]. The
recalculation of the statistics data will be performed immediately.
If you would like to add other titrations to the statistics, you can do this in
the statistical overview.
To Next Page
Loading...
