MicroP XRF-2000 Series - Page 3

XRF-2000 Series Operating Manual
3
IMPORTANT – PLEASE READ THIS FIRST!
COPYRIGHT○
c
2011 MicroP Co., Ltd. ALL RIGHT RESERVED
PLEASE READ CAREFULLY THE OPERATION AND
APPROPRIATE MAINTENANCE INSTRUCTIONS IN THIS
MANUAL BEFORE ATTEMPTING TO OPERATE THE EQUIPMENT.
NOTWITHSTANDING MICRO PIONEER’S LIMITED WARRANTY,
MICRO PIONEER WILL NOT ASSUME ANY LIABILITY FOR
INJURY, LOSS OR DAMAGE TO PERSONNEL, PROPERTY OR
TO THE EQUIPMENT IF IT IS NOT CONNECTED OR OPERATED
PROPERY.
SERVICE AND REPAIR OF THE SYSTEM SHOULD BE LIMITED
TO QUALIFIED PERSONNEL ONLY. THE SYSTEM MUST BE
DISCONNECTED FROM THE ELECTRICAL POWER SOURCE
BEFORE SERVICING.
MICRO PIONEER RESERVES THE RIGHT TO MAKE CHANGES
AND IMPROVEMENTS IF THE SYSTEM, AS WELL AS IN THE
SPECIFICATIONS AND DESCRIPTIONS PROVIDED IN THIS
MANUAL WITHOUT PRIOR NOTICE. FOR ADDITIONAL
INFORMATION, PLEASE CONTACT:
MicroP Co., Ltd.
RM# 704 Dae-Ryung Post Tower 6
th
50-3 Kasan-Dong, Geumcheon-Gu, Seoul 153-715 Korea
www.micropioneer.com
TEL : +82-2-2083-8811
info@micropioneer.com