To Next Page

To Previous Page

84 M32 - Digital Console User Manual 85

Chamber Reverb

Chamber Reverb simulates the reverberation found in medium sized spaces, somewhere between the intimacy of a small

room, and the grandeur of a large hall. Inspired by the Lexicon Chamber Reverb.

The PRE DELAY slider controls the amount of time before the reverberation is heard following the source signal. DECAY

controls the amount of time it takes for the reverb to dissipate. SIZE controls the perceived size of the space being created

by the reverb eect. The DAMP slider adjust the decay of high frequencies within the reverb tail. DIFF(usion) controls the

initial reection density. SHAPE adjust the contour of the reverberation envelope.

Room Reverb

Room Reverb simulates the reverberation that occurs when sound is recorded in a small room. When you want to add a

bit of warmth and just a touch of reverb, the M32’s Vintage Room breathes life into close-miked guitar and drum tracks.

Inspired by the Lexicon Room Reverb.

The PRE DELAY slider controls the amount of time before the reverberation is heard following the source signal. DECAY

controls the amount of time it takes for the reverb to dissipate. SIZE controls the perceived size of the space being created

by the reverb eect. The DAMP slider adjust the decay of high frequencies within the reverb tail. DIFF(usion) controls the

initial reection density. SHAPE adjust the contour of the reverberation envelope.

Plate Reverb

A plate reverb was originally created by sending a signal through a transducer to create vibrations on a plate of sheet

metal which were then picked up as an audio signal. Our algorithm simulates that sound with high initial diusion and a

bright-coloured sound. The M32’s Plate Reverb will give your tracks the sound heard on countless hit records since the late

1950s. Inspired by the Lexicon PCM-70.

PRE DELAY controls the amount of time before the reverberation is heard following the source signal. DECAY controls the

amount of time it takes for the reverb to dissipate. SIZE adjusts the size of the virtual room created by the reverb eect.

The DAMP rotary control adjusts the decay of high frequencies within the reverb tail. DIFF(usion) controls the initial

reection density. The LO CUT rotary control sets the frequency beneath which the source signal will not pass through the

reverb. The HI CUT rotary control sets the frequency above which the source signal will not pass through the reverb. BASS

MULT(iplier) rotary control adjusts the decay time of the bass frequencies. XOVER controls the crossover point for bass.

MOD DEPTH controls the intensity of the reverb tail modulation. SPEED controls the speed of the reverb tail modulation.

Vintage Reverb

Based on the legendary EMT250, the M32’s Vintage Reverb delivers shimmering, bright reverb that won’t drown out or

overpower your live or recorded tracks. Use Vintage Reverb to sweeten vocals and snare drums without sacricing clarity.

When Layer 1 is selected, the rst slider on the left sets the reverb time from 4 milliseconds to 4.5 seconds. Slider 2 controls

the low-frequency multiplier decay time. Slider 3 controls the high-frequency multiplier decay time. Slider 4 controls the

amount of modulation in the reverb tail. When Layer 2 is selected, slider 1 adjusts the pre-delay. Slider 2 selects the low-

cut frequency. Slider 3 selects the hi-cut frequency. Slider 4 selects adjusts the output level of the reverb.

Provisional

Midas M32 User Manual

Other manuals for Midas M32