Miele G2000 - Page 166

Technical Information
166
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Delay start
LED
Function Programming Display
Flashing Rhythm of
Rinse LED
Long Short Long Short Display
- - P0
2 4
Pos. 24:
Soak
activation /
deactivation
(from
software
version ID
no. 818)
Press the Gel button
24 times. The Gel
LED flashes 2 times
slowly and 4 times
rapidly intermittently.
Press the program
button as appropriate
to make the desired
setting.
The display
shows P and a
digit alternately.
Setting options:
P0 = Soak not
activated; P1 =
Soak activated.
- 1 P1
Long Short Long Short Display
- - P0
2 5
Pos. 25: Pre-
wash
activation /
deactivation
(from
software
version ID
no. 818)
Press the Gel button
25 times. The Gel
LED flashes 2 times
slowly and 5 times
rapidly intermittently.
Press the program
button as appropriate
to make the desired
setting.
The display
shows P and a
digit alternately.
Setting options:
P0 = Pre-wash
not activated; P1
= Pre-wash
activated.
-
1 P1
Long Short Long Short Display
- - P0
2 6
Pos. 26:
Second
interim rinse
selection
(from
software
version ID
No. –984)
Press the Gel button
26 times. The Gel
LED flashes 2 times
slowly and 6 times
rapidly intermittently.
Press the program
button as appropriate
to make the desired
setting.
The display
shows P and a
digit alternately.
Setting options:
P0 = Standard
setting; P1 = With
second interim
rinse.
- 1 P1
Long Short Long Short Display
- - P0
2 7
Pos. 27:
Extended
drying time
(from
software
version ID
no. 818)
Press the Gel button
27 times. The Gel
LED flashes 2 times
slowly and 7 times
rapidly intermittently.
Press the program
button as appropriate
to make the desired
setting.
The display
shows P and a
digit alternately.
Setting options:
P0 = Normal
drying time; P1 =
Extended drying
time.
- - P1
Long Short Long Short Display
- - P0
3 6
Pos. 36:
Machine
height
setting (from
software
version ID
no. 818) *1
Press the Gel button
36 times. The Gel
LED flashes 3 times
slowly and 6 times
rapidly intermittently.
Press the program
button as appropriate
to make the desired
setting.
The display
shows P and a
digit alternately.
Setting options:
P0 = Normal
machine height
(G1xxx); P1 =
XXL model
(G2xxx).
- - P1