22
☝ Attention Read the manuals at least one time from cover
to cover. Familiarize yourself with all functions and espe-
cially all safety precautions.
☝ Take note of the video-tutorials on www.vstabi.info, both for
VBar Control and VBar.
☑ Download VBar Control Manager from www.vstabi.info
and install (see page 18).
☑ Connect VBar Control to the internet using the VBar Con-
trol Manager, to get updates automatically. Select ‚Applica-
tions‘. Register your VBar Control to your MikadoID, and
select your desired language.
☑ Change the stick mode if necessary. Remove the metal
brake from the collective stick. Adjust the stick tension to
your liking if necessary (see page 14).
☑ Assign all mandatory and optional switches according to
your liking (see page 13).
☑ If you want to convert an already existing VBar for use
with VBar Control, please register it to your MikadoID on
www.vstabi.info and enable the rmware version 6 for it.
☑ If you want to use a new VBar with VBar Control that al-
ready has rmware version 6 installed, you can proceed
directly.
☑ Go through the Setup Wizard for your type of model. (page
24, page 26).
☑ Go through the ESC Setup Wizard (Mikado OEM-YGE
page 29, Kontronik page 30, other ESCs page 31).
☑ Do a pre-ight check (page 35).
☑ Have fun!
VBar Control
Setup
To Next Page
Loading...
